Bertch Legacy Cabinet Specifications
Here are the diagrams I pulled right out of the Bertch Legacy spec book. These were accurate as of early 2010. I will note any construction embellishments after the diagrams.
Bertch Legacy Wall Cabinet Specs:
1. 1/2” 5-ply veneer core plywood sides
2. 3/8” concealed hanging rail installed behind back of cabinet at top and bottom of cabinet
3. 1/2” thick floors and tops dadoed into cabinet sides
4. Sides fastened to front frame with full length tongue and groove joint
5. Blind mortised and tenoned frame construction
6. 1/2” thick floors and tops dadoed into cabinet sides
7. Solid wood face frames
8. 1/8” thick hardboard with natural birch woodgrain laminate
Bertch Legacy Base Cabinet Specs:
9. 1/2” 5-ply veneer core plywood sides with reinforcing corner blocks at points of stress
10. Back hanger rail of 3/4” poplar
11. Sides fastened to front frame with full length tongue and groove joint
12. 5/8” thick solid birch drawer box sides
13. Drawer box bottoms are 1/4” plywood dadoed into drawer box
14. 1/2” thick floors and tops dadoed into cabinet sides
15. Blind mortise and tenoned face frame assembly
16. Solid wood face frames
17. Dovetailed all four corners
18. 1/8” thick hardboard with natural birch woodgrain laminate
Bertch Legacy offers an ALL plywood option, which means that the backs, shelves, floors, and tops are all plywood rather than particleboard. This comes at an 8% upcharge; to figure the new price on something with an all plywood option in Bertch Legacy, multiply whatever cabinet price you’re wondering about by 1.08 and there’s your new price.
No Comments »
No comments yet.
RSS feed for comments on this post. TrackBack URL
Leave a comment
Other Specs Articles
